Do you know in real time which post is working and what it is measuring?
Aerosol Posts collects the readings of the devices in the monitoring posts and shows them on a map, a dashboard and charts. When a post stops sending data or goes out of range, you get an email.
The demo uses sample data. Do not enter real data.
Data from the posts reaches you late and in pieces.
Readings are collected by hand
Measurements from different points are copied and assembled into spreadsheets, often with a delay.
A stopped post is noticed late
A device that has lost its connection, or a reading out of range, goes unnoticed until someone needs a report.
The old software falls short
Without a map, charts and phone access it is hard to see where the problem is while you are out in the field.
All your posts on one screen.
Aerosol Posts follows the path of the data: from the device on site to the dashboard, the chart and the email.
Data straight from the devices
The devices in the posts send their measurements automatically. No manual entry and no copying.
Map of the posts
Every post is on an OpenStreetMap map and coloured according to its status: flow rate against the thresholds, and missing data.
Live data dashboard
For every post you see the latest measurement: temperature, standard flow rate, accumulated volume and how long it has been running.
History and charts
Historical measurements are viewed in charts, so you can see how a post changes over time.
Excel and print
Measurement data is exported to Excel, and reports can be printed.
Email notifications
The system sends an email when a post is inactive or out of range. Recipients are configured in the application, and the history of notifications sent is on the notifications page.
Posts, protocols and people
You manage the posts, the sampling protocols and the responsible persons.
Roles and permissions
The administrator decides who can see and do what, and permissions can be changed at any time without code changes.
Mobile app
An Android and iOS app shows the status of the posts in the field, with the same map and charts as the web version.
Bulgarian and English
The whole interface is available in Bulgarian and English.
Click an image to enlarge it. The data is sample data.
Built for real monitoring.
Aerosol Posts replaced a roughly ten-year-old system for radioecological monitoring around the Kozloduy Nuclear Power Plant. CE2S developed both the sampling devices and the software, and the old data was migrated into the new system.
Aerosol Posts is part of CE2S, a Bulgarian studio for custom software and electronics. See our other projects.
Have measurement posts and want to see them in one place?
Tell us what you measure and how many posts you have. We'll reply and arrange a time to go through it together.